DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Machine
DC 48V 500W ER11 Brushless Spindle Motor Driver Speed Controller For CNC Engraving Machine. WS55-220 is a high performance, cost-effective 3 phase BLDC motor controller. Voltage range is from 20V DC to 50V DC. The controller can drive the DLDC motor with HALL or without HALL.The spindle radial runout about. 0.01 to 0.03. Can be used for metal or non-metal materials such as carving. The spindle with forced air cooling, can work long hours. Brushless DC speed driver controller parameters. AL signal:This port and the ground have a 5V alarm output output. Green LED(The led is on once power on). Red LED(The led flash one times continuas When the device is suspended). At normal temperature and pressure. 0.5KV, 1 minute at normal temperature and pressure. Brushless, low interference, in addition to the brushless motor brush, the most immediate change is no brush spark generated when the motor running, thus greatly reduce the electric spark interference of remote radio equipment. Low noise, smooth operation, brushless motor without brush, less friction force during operation, smooth operation, low noise will be many. Long life and low maintenance costs, less brush, brushless motor wear is mainly on the bearing, from the mechanical point of view, brushless motor is almost a free maintenance of the motor. Speed/Current alike close loop technology, smooth rotation. Pure hardware design, high-speed, high noise immunity. F/R(forward / reverse control) Rotation, soft shift function. Over current, short circuit protection (red LED indicator). 1 x Engraving machine principal axis. 2 x line(as picture). Please allow a bit error due to manual measurement. The color may have different as the difference display, pls understand. There are no instructions included in this kit. Professional Installation Is Highly Recommended!
- Brand: Unbranded/Generic
- Country/Region of Manufacture: China
- MPN: Does Not Apply