M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original    M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original. The Series 71, 72 and 76 Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed. Replaces M734H, J, ; M744S, T, Y; and M745L, S, T, Y Motors. M7164, M7261, M7284, and M7294 are non-spring return motors; M7282, M7285, M7286 and M7685 are spring return motors. Integral junction box provides NEMA 3 weather protection. Motor and circuitry operate from 24 Vac. Models available with factory installed transformer, or a field added internal transformer. Quick-connect terminals are standard-screw terminal adapter is available. Adapter bracket for matching shaft height of older motors is available. Most motors have field adjustable stroke (90° to 160°). Integral auxiliary switches are available factory mounted, or can be field added. Nominal timing standard of 30 seconds (90° stroke), and 60 seconds (160° stroke). Spring return motors can operate valve linkages from power end or auxiliary end shafts for normally closed or normally open valve applications. All models have dual shafts (slotted and tapped on both ends). All models have auxiliary switch cams. Fixed torque throughout the entire voltage range. Motors are designed for either normally open or normally closed valves and dampers. Models available with adjustable start (zero) and span. Models available with 4 to 20 mA input signal. Models available with 2 to 10 Vdc input signal. Fail Safe Mode: Non-Spring Return. Control Signal: Modulating, 4-20 mA. Motor Shaft: Dual ended Shaft. Stroke: Adjustable; 90 to 160 degrees, symmetrical. External Auxiliary Switches Available: Yes.

Frequency: 50 Hz, 60 Hz. Power Consumption Driving (VA): 15 VA. High x 5 1/2 in. Wide x 8 3/4 in.

Temperature Range: -40 to 150F. Deadweight Load on Shaft (Either End) (lb): 200 lbs. Deadweight Load on Shaft (Combined on both shafts) (lb): 300 lbs. Auxiliary Switch Ratings AFL - 120 Vac: 7.2A. Auxiliary Switch Ratings AFL - 240 Vac: 3.6A.

Auxiliary Switch Ratings ALR- 120 Vac: 43.2A. Auxiliary Switch Ratings ALR- 240 Vac: 21.6A.

We focus on industrial field accessories and combustion nozzles and other accessories products. Feedback is very important to us. It is impossible to address issues if we do not know about them!

The item "M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original" is in sale since Wednesday, January 24, 2018. This item is in the category "Business & Industrial\Automation, Motors & Drives\Rotary & Linear Motion\Linear Actuators". The seller is "burnerworld-2" and is located in ShenZhen. This item can be shipped worldwide.
  • Model: M7284A1004
  • Modified Item: No
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Brand: Honeywell
  • Non-Domestic Product: No
  • Standard voltage: 120V (Optional 220V)

M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original    M7284A1004 17Nm Honeywell Damper Actuators Modutrol Motor For Burner Original