Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner

Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner

Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner

Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner    Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner

Parker LX80L Precision Miniature Linear Servomotor Table with Metric Mounting and Double Row Bearings. Parker LX80L Precision Miniature Linear Servomotor Table. Verified operation of linear motor.
Verified operation of all limit and home Hall sensors. Verified alignment of encoder read head. Encoder resolution to 1 micron. Miniaturization of life sciences, electronics, photonics, and fiber optic processes has driven the need for smaller and more efficient positioners. Parkers MX80, the smallest linear servomotor driven positioner in the industry, has redefined high-throughput automation in the world of miniature positioners.
It is loaded with high performance features for both rapid linear translation and precise positioning of smaller loads within very small work envelopes. The LX80L picks up where the MX80 leaves off, offering longer travels than the MX80 while maintaining a very small profile. Like the MX80, it is designed to meet the rigors of todays 24/7 production demands. High Performance in a Small Package. Although it has a small profile, the LX80L is large on performance and reliability. All key components are built-in, residing within the body of the table to provide a clean looking, reliable, unobstructed package. At the heart of the LX80L is an innovative non-contact linear servo motor (patent pending). This direct drive motor has been optimized for force, speed, and acceleration to deliver outstanding performance and response. A high-precision non-contact linear encoder provides submicron resolution, repeatability and accuracy with selectable resolutions ranging from 0.1 microns to 5 microns. Hall effect limit and home sensors are conveniently designed into the unit for easy adjustment over the entire travel of the table. Precision square rail bearings provide load support and precise linear translation, while effectively countering the problematic effects of heat, high speeds, and high acceleration. Cable management is neatly packaged inside the unit so no moving cables are visible.
From the end of the unit, high-flex cabling is provided for direct connection to the servo drive. This high-flex cabling alleviates cable flexing concerns associated with the second or third axis in multi-axis system. Precision linear bearings support the carriage, motor, and payload.

Sized to provide virtually unlimited life, the bearings provide stable and accurate linear motion while maintaining high rigidity even under combined or fluctuating loads. Unique in the LX80Ls design are single and double linear bearing rail options. The double rail design consists of two linear rails spaced apart with a total of four bearing trucks.

This version offers the best load capacity, straightness/ flatness, and stability. For applications requiring minimal load capacity and precision, a single rail version is offered with a single linear rail and two bearing trucks. This version reduces cost and further reduces the width to 63 mm. The single rail version is also useful when building gantry systems where stability is achieved through use of a second axis or idler rail. Standard dowel pin locating holes facilitate repeatable mounting of a table and payloads. Two dowel holes in the LX80L base enable simple, repeatable mounting of the table into a machine. Similarly, two dowel holes in the carriage enable simple, repeatable mounting of a fixture or payload onto the LX80L. Hall effect home and limit sensors are completely housed within the body of the motor driven table. An innovative design adds functionality without sacrificing geometry.

Sensor triggers can be easily adjusted over the travel. The output format is an open collector type capable of sinking up to 50 mA.

High-flex Cables w/ViX connector, 3 meter. Inspection by a Hofstra Group technician allows us to guarantee this hardware to perform to your satisfaction. Please review our Sales Agreement. _gsrx_vers_625 GS 6.9.7 (625). The item "Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner" is in sale since Tuesday, August 30, 2016. This item is in the category "Business & Industrial\Automation, Motors & Drives\Linear Motion\Linear Actuators". The seller is "hofstragroup" and is located in Santa Fe, New Mexico.

This item can be shipped worldwide.


Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner    Parker LX80L Precision Linear Motor Stage Table Servo Encoder 680mm Positioner