SPZ46 ZAxes Linear Stage Horizontal Ball Sliding Table 40x40mm with Drive+Motor
SPZ46 ZAxes Linear Stage Horizontal Ball Sliding Table 40x40mm with Drive+Motor. The product using PI control algorithm, come with low noise, low vibration and low heat 2. Convenient current setting, there are 16 levels optional, the peak output current can be up to 2.2A 3. Can drive 4, 6, 8 wire 2phase stepping motors, possess automatic parameter adjustment function for different motors 4. Come with overvoltage, undervoltage alarm, phase current overcurrent protection, motor phase open circuit detection and other functions 5. The pulse, direction and enable terminals all have constant current input functions, can directly connect to the input signal without external series resistance buck currentlimiting protection 6. Using multilayer board and surface mount seal, possess high reliability, enough margin for power devices. Item Type: Z-Axis Linear Stage Material: Steel, electroless nickel plated Model: SPZ46 Moving Direction: Z-axis Table Size: Approx. 40 x 40mm / 1.6 x 1.6in Table Height: Approx. 60mm / 2.4in ±3 Moving Amount: Approx. 6mm / 0.2in Load(kg): 3 kg / 6.6 lbapprox. Maximum Speed (mm/s): 10 Parallelism (m): 50 Straightness (m): Within 3 Single-Phase Positioning Accuracy (m): Within 30 Repeat Positioning Accuracy (m): ±5 Sensor: NPN open circuit output limit + origin 2-Phase Stepping Motor: 1.3A/phase Power Supply: Up to DC48V Input Pulse Frequency: Maximum 300KHz How to Use: 1. Install the sliding table 2. Connect the drive data cable. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.
If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.
The seller is "globebestdeal" and is located in Shenzhen. This item can be shipped worldwide.
- 2-Phase Stepping Motor: 1.3A/phase
- Brand: Unbranded/Generic
- Country/Region of Manufacture: China
- Input Pulse Frequency: Maximum 300KHz
- Load: 3 kg / 6.6 lb
- Maximum Speed: 10mm/s
- Model: SPZ46
- Moving Amount: 6mm / 0.2in
- Moving Direction: Z-axes
- MPN: Does Not Apply
- Parallelism: 50m
- Power Supply: Up to DC48V
- Table Height: 60mm / 2.4in ±3
- Table Size: 40 x 40mm / 1.6 x 1.6in
- Type: Z-Axes Linear Stage