DIY Reciprocating Cycle Linear Actuator 24V 120rpm Stroke 30160mm Adjustable



DIY Reciprocating Cycle Linear Actuator 24V 120rpm Stroke 30160mm Adjustable. Stroke: 30-160mm 1.2inch-6.2inch (Adjustable); No load Speed:12-120RPM(Adjustable); Rated Voltage: DC 24V. The motor is tiny but have plenty of power. Pushing force: 1.5-7.5kg. The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load.
The Angle Can Be Adjusted? The angle can be changed quickly, and it can be used in a true vertical 90°with flexible angle adjustment.
Of the motor is 35mm/1.38" and the height is 48mm/1.89". By changing the position of the screw on the slide rail. Stand Kit with Angle Adjustable. If you cannot tighten the black handle here, please use the installation tool to loosen the screw on the opposite side of the handle.
In this case, it can be tightened with the handle. The motor is equipped with a. After installing the remote control board, the remote control can be used to control the motor from a distance. 1Press and hold the motherboard. For 3 seconds and then let go.
At this time, the pairing indicator will be on, then press. Twice, and the motor is working.
The seller is "shinedeerdirect2018" and is located in this country: CN. This item can be shipped worldwide.
- Pack: 24V150mm45rpm
- Brand: Unbranded
- Voltage: 12V/24V
- Model: Reciprocating Motor
- Stroke Length: 30-160MM

