Motorized XYZ Stage with Galil DMC-4030, Renishaw TONiC 0.1um Encoders 130x130x5mm
Motorized XYZ Stage w/ Galil DMC-4030, Renishaw TONiC 0.1um Encoders 130x130x5mm. Nicely made, motorized XYZ stage. This has 130mm travel in the X and Y axes and 5mm in the Z. All axes are driven by NEMA 17 bipolar (4 wire) stepper motors which are controlled by a Galil DMC-4030 controller.
X and Y ride on crossed-roller bearings. The Z axis uses 4 ball cage shaft bearings and is lifted by a dual cam mechanism driven by worm gear reducers. All 3 axis have Renishaw TONiC series high resolution linear position encoders with 0.1um resolution.
This includes all necessary wiring except an adapter for the Z axis position encoder which seems to have gotten misplaced. A pre-wired 48V DC Mean Well USP-225-48 power supply is also included to get you up and running quickly. The stages part number is M108440. The overall size of the stage is about: 17 x 16 x 7 and weighs 52lbs.
Interface: Ti0200A20A (x200, 0.1um, 20MHZ). Scale Tape: Gold plated RGSZ20 type w/ 20um pitch.
2 x 150 mm long. 1 x 20 mm long. The DMC-4030 motion controller is Galil's highest performance, stand-alone motion controller. It belongs to Galil's latest generation motion controller family, which accepts encoder inputs up to 22 MHz, provides servo update rates as high as 32 kHz, and processes commands as fast as 40 microseconds-10 times the speed of prior generation controllers.
The DMC-4030 is a full-featured motion controller packaged with optional multi-axis drives in a compact, metal enclosure. The unit operates stand-alone or interfaces to a PC with Ethernet 10/100Base-T or RS232. The controller includes optically isolated I/O, high-power outputs capable of driving brakes or relays, and analog inputs for interfacing to analog sensors. The DMC-4030 controller and drive unit accepts power from a single 20-80 VDC source.
The DMC-4030 has 3 axes and each axis is user-configurable for stepper or servo motor operation. With a powerful RISC processor, the DMC-4030 controllers provide such advanced features as PID compensation with velocity and acceleration feedforward, program memory with multitasking for simultaneously running eight applications programs, and uncommitted I/O for synchronizing motion with external events. Modes of motion include point-to-point positioning, position tracking, jogging, linear and circular interpolation, contouring, electronic gearing and ecam. Like all Galil controllers, programming the DMC-40x0 is simplified with two-letter, intuitive commands and a full set of software tools such as GDK for servo tuning and analysis. 10/100 Base-T Ethernet port with Auto MDIX. RS232 ports up to 115 kbaud. User-configurable for stepper or servo motors on any combination of axes.
Available with internal, multi-axis servo or stepper drives. Or, connect to external drives. Accepts up to 22 MHz encoder frequencies for servos; Outputs up to 6 MHz for steppers.
Sample times as low as 31 microseconds per axis; fast command processing. Advanced PID compensation with velocity and acceleration feedforward, integration limits, notch filter and low-pass filter Modes of motion include jogging, point-to-point positioning, position tracking, contouring, linear and circular interpolation, electronic gearing and electronic cam. Ellipse scaling, slow-down around corners, infinite segment feed and feedrate override. Multitasking for concurrent execution of up to eight application programs. Expanding, non-volatile memory for application programs, variables and arrays.
Optically isolated home input, forward and reverse limits for every axis. 1-4-axis: 8 inputs and 8 outputs. 5-8-axis: 16 inputs and 16 outputs. Isolated, high-power outputs for driving brakes or relays.
High speed position latch and output compare. 32 additional 3.3 TTL V I/O (5 V optional); Add more I/O with RIO-471xx PLC. 2 line x 8 character programmable LCD. Accepts single 2080 VDC input. Communication drivers for Windows and Linux.
Custom hardware and firmware options available. We take pride in our careful packing of delicate items. We do guarantee that the items we sell will be delivered in the condition described in the listing and pictures.
Please read the listing carefully, do your research and ask us any questions you need to decide if the item is suitable for your use. We will not falsify export documentation. PO Box 1134 Alviso, CA 95002. The item "Motorized XYZ Stage with Galil DMC-4030, Renishaw TONiC 0.1um Encoders 130x130x5mm" is in sale since Thursday, January 28, 2021.
This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Rotary & Linear Motion\Linear Actuators". The seller is "starlight-photonics" and is located in Alviso, California.
This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Australia, South africa, Bahamas, New Zealand, Barbados, Bermuda, Bolivia, Egypt, French guiana, Guadeloupe, Cayman islands, Martinique, Nicaragua, Paraguay, Reunion, Uruguay.
- Brand: Galil
- MPN: DMC-4030
- Stroke Length: 130 x 130 x 5mm