Parker AC Servo Motor EtherCAT Drive Linear Actuator & Cables
Parker AC Servo Motor EtherCAT Drive Linear Actuator & Cables Kit. They were never installed or powered on. Packages were opened for inspection, and then put into storage. This includes everything you need to get going!
All of the cables to connect between the motor and drive are included. Original packaging is also included. I have 5 of these kits total, and I have an extra motor, drive, and cables without an actuator. Linear Actuator With Gearbox pre-installed.Motor Mounted Parallel (12 o-clock)/groove for limits at 3 & 9 o-clock. No additional lubrication bore(standard). Motor Flange Dimensions - 70, 50, 3.5, M5, 30. Cylinder mount - Rear Eye (MP4) - NOTE this is from the part number. I would have called it a clevis on the rear. Rod End Male Thread (Metric) Rode End. 200mm stroke or travel length. IP54 Rated with Stainless Steel Screwsl. The part number indicates a gear ratio of 1:1, but I have not removed the gearbox to confirm this, nor is this a standard option from Parker. Serial Encoder 16,19 bit. Servo Motor Power Cable - 10 Meter. Servo Motor Encoder Cable - 10 Meter. Servo Drive I/O Cable - 10 Meter.
- Custom Bundle: Yes
- MPN: Does Not Apply
- Bundle Description: Linear Motion EtherCAT Bundle
- IP Rating: IP54
- Nominal Rated Input Voltage: 110 V
- Model: PM-FBL04AMK, PD-04k, ETH033M05C1NMDEMN0200B,
- Power Rating: 400 W
- Brand: Parker